Aluminum 7050-T7451 (7050-T73651)


Subcategory: 7000 Series Aluminum Alloy; Aluminum Alloy; Metal; Nonferrous Metal

Close Analogs:

Composition Notes:
Aluminum content reported is calculated as remainder.
Composition information provided by the Aluminum Association and is not for design.

Key Words: AA7050-T7451; AA7070-T73651, UNS A97050; ISO AlZn6CuMgZr; Aluminium 7050-T7451; Aluminium 7070-T73651

Component   Wt. %
Al87.3 - 90.3 
CrMax 0.04 
Cu2 - 2.6 
FeMax 0.15 
Component   Wt. %
Mg1.9 - 2.6 
MnMax 0.1 
Other, eachMax 0.05 
Other, totalMax 0.15 
Component   Wt. %
SiMax 0.12 
TiMax 0.06 
Zn5.7 - 6.7 
Zr0.08 - 0.15 

Material Notes:
Data points with the AA note have been provided by the Aluminum Association, Inc. and are NOT FOR DESIGN.

Physical PropertiesMetricEnglishComments
Density2.83 g/cc0.102 lb/in³ AA; Typical

Mechanical Properties
Hardness, Brinell140140 500 kg load with 10 mm ball. Calculated value.
Hardness, Knoop177177 Converted from Brinell Hardness Value
Hardness, Rockwell A51.651.6 Converted from Brinell Hardness Value
Hardness, Rockwell B8484 Converted from Brinell Hardness Value
Hardness, Vickers162162 Converted from Brinell Hardness Value
Ultimate Tensile Strength524 MPa76000 psi AA; Typical
Tensile Yield Strength469 MPa68000 psi AA; Typical
Elongation at Break11 %11 % AA; Typical; 1/2 in. (12.7 mm) Diameter
Modulus of Elasticity71.7 GPa10400 ksi AA; Typical; Average of tension and compression. Compression modulus is about 2% greater than tensile modulus.
Poisson's Ratio0.330.33 
Fracture Toughness28 MPa-m½25.5 ksi-in½ K(IC) in S-L Direction
Fracture Toughness31 MPa-m½28.2 ksi-in½ K(IC) in T-L Direction
Fracture Toughness35 MPa-m½31.9 ksi-in½ K(IC) in L-T Direction
Shear Modulus26.9 GPa3900 ksi 
Shear Strength303 MPa44000 psi AA; Typical

Electrical Properties
Electrical Resistivity4.3e-006 ohm-cm4.3e-006 ohm-cm 

Thermal Properties
CTE, linear 68°F23 µm/m-°C12.8 µin/in-°F AA; Typical; Average over 68-212°F range.
CTE, linear 250°C25.4 µm/m-°C14.1 µin/in-°F Average over the range 20-300ºC
Specific Heat Capacity0.86 J/g-°C0.206 BTU/lb-°F 
Thermal Conductivity157 W/m-K1090 BTU-in/hr-ft²-°F 
Melting Point488 - 629 °C910 - 1165 °F AA; Typical range based on typical composition for wrought products 1/4 inch thickness or greater
Solidus488 °C910 °F AA; Typical
Liquidus629 °C1165 °F AA; Typical

Processing Properties
Annealing Temperature413 °C775 °F 
Solution Temperature477 °C890 °F 
Aging Temperature121 - 177 °C250 - 350 °F 

References for this datasheet.


Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistant format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's disclaimer and terms of use regarding this information. MatWeb data and tools provided by MatWeb, LLC.