AISI Type 347 Stainless Steel, annealed and cold drawn, bar


Subcategory: Ferrous Metal; Heat Resisting; Metal; Stainless Steel; T 300 Series Stainless Steel

Close Analogs: AISI Type 348

Key Words: AFNOR Z 6 CNNb 18.10, UNI X 8 CrNiNb 18 11, JIS SUS 347, SS14 2338 (Sweden), UNS S34700, AMS 5512, AMS 5556, AMS 5558, AMS 5571, AMS 5575, AMS 5646, AMS 5654, AMS 5674, AMS 5680, AMS 5681, ASME SA182, ASME SA193, ASME SA194, austenitic, ASME SA213, ASME SA240, ASME SA249, ASME SA312, ASME SA320 (B8C), ASME SA358, ASME SA376, ASME SA403, ASME SA409, ASME SA430, ASME SA473, ASME SA479, ASME SA493, ASME SA511, ASME SA554, ASME SA580, ASME SA633, FED QQ-S-763, FED QQ-S-766, B.S. 347 S 17, B.S. En. 58 F, B.S. En. 58 G, B.S. ANC 3 Grade B, FED QQ-W-423, MIL SPEC MIL-S-862, MIL SPEC MIL-S-23196, SAE J405 (30347), DIN 1.4550, ISO 683/13 16

Component   Wt. %
CMax 0.08 
Cr17 
Fe68 
Component   Wt. %
MnMax 2 
Nb + Ta0.8 
Ni11 
Component   Wt. %
PMax 0.045 
SMax 0.03 
SiMax 1 

Material Notes:
Niobium plus Tantalum is ten times the minimum carbon content, 25 mm diameter

Physical PropertiesMetricEnglishComments
Density8 g/cc0.289 lb/in³ 

Mechanical Properties
Hardness, Brinell212212 
Hardness, Knoop235235 Converted from Brinell hardness.
Hardness, Rockwell B9494 Converted from Brinell hardness.
Hardness, Rockwell C1616 Converted from Brinell hardness. Value below normal HRC range, for comparison only.
Hardness, Vickers223223 Converted from Brinell hardness.
Tensile Strength, Ultimate690 MPa100000 psi 
Tensile Strength, Yield450 MPa65300 psi at 0.2% offset
Elongation at Break40 %40 % in 50 mm
Modulus of Elasticity195 GPa28300 ksi 
Poisson's Ratio0.270.27 
Charpy Impact160 J118 ft-lb 
Izod Impact120 - 160 J88.5 - 118 ft-lb 
Shear Modulus77 GPa11200 ksi 

Electrical Properties
Electrical Resistivity7.3e-005 ohm-cm7.3e-005 ohm-cm at 20°C

Thermal Properties
CTE, linear 20°C17.3 µm/m-°C9.61 µin/in-°F from 0-100°C (32-212°F)
CTE, linear 250°C17.8 µm/m-°C9.89 µin/in-°F at 0-260°C (32-500°F)
CTE, linear 500°C18.4 µm/m-°C10.2 µin/in-°F at 0-540°C, 18.7 µm/m-C at 0-650°C
Specific Heat Capacity0.5 J/g-°C0.12 BTU/lb-°F from 0-100°C (32-212°F)
Thermal Conductivity16.3 W/m-K113 BTU-in/hr-ft²-°F at 100°C (212°F), 21.5 W/m-K at 500°C (930°F)
Melting Point1400 - 1425 °C2550 - 2600 °F 
Solidus1400 °C2550 °F 
Liquidus1425 °C2600 °F 
Maximum Service Temperature, Air870 °C1600 °F Intermittent Service
Maximum Service Temperature, Air925 °C1700 °F Continuous Service

References for this datasheet.


Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistant format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's disclaimer and terms of use regarding this information. MatWeb data and tools provided by MatWeb, LLC.