AISI Type 410 Stainless Steel, tempered at test temperature plus 28°C, tested at 480°C (900°F)


Subcategory: Ferrous Metal; Heat Resisting; Metal; Stainless Steel; T 400 Series Stainless Steel

Close Analogs: AISI Type 410S

Key Words: AFNOR Z 12 C 13, UNI X 12 Cr 13, JIS SUS 410, SS14 2302 (Sweden), B.S. 410 S 21, UNS S41000, AMS 5504, AMS 5505, AMS 5591, AMS 5613, AMS 5776, AMS 5821, ASME SA194 (6), ASME SA240, ASME SA268, ASME SA479, ASTM A176, ASTM A193, ASTM A194, ASTM A240, ASTM A276, ASTM A314, ASTM A473, ASTM A479, ASTM A493, ASTM A511, martensitic, ASTM A580, FED QQ-S-763, FED QQ-W-423, MIL SPEC MIL-S-862, SAE J405 (51410), B.S. En. 56 A, B.S. ANC 1 Grade A (U.K), SAE J412 (51410), DIN 1.4006, AFNOR Z 10 C 13, AFNOR Z 10 C 14 (France), ISO 683/13 3

Component   Wt. %
CMax 0.15 
Cr12.5 
Fe86 
MnMax 1 
PMax 0.04 
SMax 0.03 
SiMax 0 

Material Notes:
16 mm diameter bar, heated to 980°C for 30 min., oil quenched, test temperature plus 28°C temper for 2 hours

Physical PropertiesMetricEnglishComments
Density7.8 g/cc0.282 lb/in³ 

Mechanical Properties
Tensile Strength, Ultimate1150 MPa167000 psi 
Tensile Strength, Yield835 MPa121000 psi at 0.2% offset
Elongation at Break14 %14 % in 50 mm

Electrical Properties
Electrical Resistivity5.7e-005 ohm-cm5.7e-005 ohm-cm at 20°C, 0.000108 Ohm-cm at 650°C
Magnetic Permeability700 - 1000700 - 1000 annealed condition at RT

Thermal Properties
CTE, linear 20°C9.9 µm/m-°C5.5 µin/in-°F from 0-100°C (32-212°F)
CTE, linear 250°C11 µm/m-°C6.11 µin/in-°F at 0-315°C (32-600°F)
CTE, linear 500°C11.5 µm/m-°C6.39 µin/in-°F at 0-540°C, 11.7 µm/m-C at 0-650°C
Specific Heat Capacity0.46 J/g-°C0.11 BTU/lb-°F from 0-100°C (32-212°F)
Thermal Conductivity24.9 W/m-K173 BTU-in/hr-ft²-°F at 100°C; 28.7 W/m-K at 500°C
Melting Point1480 - 1530 °C2700 - 2790 °F 
Solidus1480 °C2700 °F 
Liquidus1530 °C2790 °F 
Maximum Service Temperature, Air705 °C1300 °F Continuous Service
Maximum Service Temperature, Air815 °C1500 °F Intermittent Service

References for this datasheet.


Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistant format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's disclaimer and terms of use regarding this information. MatWeb data and tools provided by MatWeb, LLC.