AISI Type S13800 Stainless Steel (PH 13-8 Mo) longitudinal properties, condition H1000


Subcategory: Ferrous Metal; Metal; Precipitation Hardening Stainless; Stainless Steel; T S10000 Series Stainless Steel

Key Words: UNS S13800, 13-8Mo, 13-8PH, 13-8 PH, 13/8 Mo, 13/8Mo, 13/8PH, 13/8 PH, AMS 5629, AMS 5840, ASME SA705 (XM-13), ASTM A564 (XM-13), ASTM A693 (XM-13), ASTM A705 (XM-13); PH 13-8 Mo; Precipitation Hardening

Component   Wt. %
Al0.9 - 1.35 
CMax 0.05 
Cr12.25 - 13.25 
Fe76 
Component   Wt. %
MnMax 0.1 
Mo2 - 2.5 
N Max 0.01 
Ni7.5 - 8.5 
Component   Wt. %
PMax 0.01 
SMax 0.008 
SiMax 0.1 

Material Notes:
Center or intermediate test location.

Martensitic, precipitation hardening (maraging) stainless steel.

Physical PropertiesMetricEnglishComments
Density7.8 g/cc0.282 lb/in³ 

Mechanical Properties
Tensile Strength, Ultimate1480 MPa215000 psi 
Tensile Strength, Yield1415 MPa205000 psi at 0.2% offset
Elongation at Break13 %13 % in 50 mm
Modulus of Elasticity221 GPa32100 ksi 
Charpy Impact54 J39.8 ft-lb 52 J at room temperature, 41J at 0°C, 27 J at -54°C, 22 J at -73°C, 16 J at -115°C, 9 J at -140°C, 5 J at -195°C
Machinability35 - 40 %35 - 40 % 35-40% average, Based on 100% machinability for AISI 1212 steel.

Electrical Properties
Electrical Resistivity0.0001 ohm-cm0.0001 ohm-cm at 25°C, 0.0001 at 100°C, 0.0001 at 200°C, 0.00011 at 315°C, 0.00011 at 425°C, 0.00011 at 540°C, 0.00011 at 595°C, in Condtion A.

Thermal Properties
CTE, linear 20°C10.6 µm/m-°C5.89 µin/in-°F at 21-95°C, 10.8 at 21-205°C
CTE, linear 250°C11.2 µm/m-°C6.22 µin/in-°F at 21-315°C, 11.3 at 21-425°C
CTE, linear 500°C11.9 µm/m-°C6.61 µin/in-°F at 21-540°C
Specific Heat Capacity0.46 J/g-°C0.11 BTU/lb-°F from 0-100°C (32-212°F)
Thermal Conductivity14 W/m-K97.2 BTU-in/hr-ft²-°F at 100°C, 15.7 at 200°C, 17.8 at 315°C, 20.4 at 425°C, 22.3 at 540°C, 22.5 at 595°C; in Condition A.
Melting Point1405 - 1440 °C2560 - 2620 °F 
Solidus1405 °C2560 °F 
Liquidus1440 °C2620 °F 

References for this datasheet.


Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistant format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's disclaimer and terms of use regarding this information. MatWeb data and tools provided by MatWeb, LLC.